ブランド | Oakton Instruments |
商品名 | WD-35811-72 |
説明 | オールインワンのpH / ATCプローブ |
内部コード | IMP967856 |
重量 | 1 |
Oakton Instruments - WD-35811-72 オールインワンのpH / ATCプローブ の価格と納期については、電子メールでお問い合わせください。 その他の型番についてもご相談に応じます。 当社はドイツの産業市場でお客様にとって最良の価格と納期を見つけるよう努めています。
当社は新品およびオリジナル製品のみを販売しています。
温湿度計用の赤いフェルトペン
pH電極、組み合わせ、単一接合、ゲル充填、BNCコネクタ
ベンチトップメーター
Glass body, combination pH electrode, refillable, open pore (10 mL electrolyte included)
General purpose glass-body pH electrode. Single-Junction. Comes with 10 mL eletrolyte
PH Meter Electrode, Oakton pH / mV / ° C meter pH 510 series should be appropriate to the electrode. Glass electrode should be. Refillable electrodes should be. Single electrode Ag / AgCl electrode should work with refens. 15-20μl electrode flow rate / N should be. Port must be ceramic electrode. 3.5 M KCl + AgCl electrode electrolyte fluid should be. Maximum pressure of 3 bar electrodes (including back pressure) should be. Measuring ranges of electrode 0-13 pH, -5 ° C - 100 ° C should be. Electrodes should be spherical in shape and diameter of 4.5 mm. Be able to connect to the device electrodes with BNC input Electrode 1m cable length should be.
Reinforced Glass-body Refillable pH Electrode, 12x110mm, BNC connector, 1m cable; spear tip
General Purpose, Flat-surface, Glass-body Single Junction Refillable pH Combination Electrode, 12x110mm, BNC connector, 1m cable
マルチパラメータ-TESTER
conductivity meter
壁掛け式気圧計
Conductivity Meter with Conductivity electrode , 1 electrode holder & Conductivity/TDS carrying kit set
/Conductivity/TDS Meter with double junction pH electrode ECFC7252201B, Conductivity electrode, 2 electrode holders (12mm dia. , 16mm dia.) & pH/Conductivity carrying kit set
Wall Mounted Barometer with Temperature
Chart paper
Chart Paper, Hygrothermograph, 2 or 3 speed, C, 7 day, For WD-37250-00,10
サーモ先端
サーモ先端
Conductivity Transmitter
Conductivity Transmitter
conductivity meter kit
Hygrothermograph
Thermohygrometer with Dew point
ベンチのpH /導電率計
マルチパラメータ-TESTER
キット